Are you a Meizu 16Xs device user and facing issues with the invalid IMEI or unknown IMEI baseband? Then don’t worry. We got you covered. Here in this guide, we’ve provided the full guide on How to Repair unknown IMEI baseband on the Meizu 16Xs device easily.

Now, talking about the IMEI (International Mobile Equipment Identity) number, it’s a unique 15-digit code that precisely identifies the device model whether you’ve used a SIM card or not. It’s worth mentioning that each and every IMEI number is unique and individually assigned to each and every mobile phone worldwide. You can also check the IMEI number on Meizu 16Xs by typing the *#06# on the dialer or Phone app.

We all know that a SIM card can be changed easily from a mobile phone. Therefore, the IMEI number comes in handy to track any particular device across the globe. Now, if you want to use a mobile device to use a SIM then it’s necessary to work the IMEI number properly. Meanwhile, the IMEI number can get corrupted or invalid or null while flashing any third-party firmware or any custom file on your device. Therefore, you should fix that issue for your Meizu 16Xs model.

Meizu 16Xs Specifications: Overview

Meizu 16Xs was announced in May 2019 which sports a 6.2-inch Super AMOLED display with a screen resolution of 2232 x 1080 pixels with 400 PPI pixel density. The device is protected by a 2.5D curved glass screen.

Meizu 16Xs is powered by a Qualcomm Snapdragon 675 chipset coupled with 6GB of RAM and 64/128GB of internal storage. The device came out of the box with Android 9.0 Pie under FlyMe and backed by a 4000 mAh battery (Non-removable).

As far as the camera concerned, the device has a Triple-camera setup with 48MP + 8MP + 5MP primary sensors and a selfie camera with an 16MP lens. Other connectivity option includes 4G-VoLTE, GPS, Glonass, Bluetooth, Mobile Hotspot, accelerometer, ambient light sensor, gyroscope, proximity sensor, and compass/ magnetometer. etc. The Meizu 16Xs come with a fingerprint sensor under display.

Steps to Repair and Fix IMEI number on Meizu 16Xs

Here you will get the easy guide to repair and restore the IMEI number on your Meizu 16Xs device by using the QCN Rebuilder Tool. This tool is free of cost and easy to use even if you’re new to this process. Now, before heading over to the guide, let’s follow all the requirements and download links below.

Now, let’s check out the download links and requirements below.

Pre-Requirements:

  • This guide and QCN file are for the Meizu 16Xs model only.
  • Your device should be charged up to 50% at least.
  • A PC/Laptop and a USB cable are required.
  • Keep a full backup of the device data before doing anything.
  • Enable USB Debugging. Check the video guide.
  • Download all the files and tools from above.

IMEI Rebuilding and Restore Guide

  • After downloading, install and run the QCN Rebuilder tool on your PC.
  • Click on Open file and select the Meizu 16Xs QCN file.
  • Now, replace the IMEI with the original IMEI number.
  • Click on Rebuild.
  • Next, connect your phone to a PC using a USB cable.
  • Open dial pad on your device and type this code ##717717## or use any method to enable diagnostic mode.
  • If the above code doesn’t work, use CMD on your PC by following the commands below.

adb shell su setprop sys.usb.config rndis,diag,adb

  • Then run the QPST tool on your computer.
  • Click on the Restore tab > select the rebuilt QCN file > click on Restore.
  • You’re done.

That’s it, guys. We hope you’ve found this guide useful for your Meizu 16Xs. If you’re facing any issues, feel free to ask in the comments below.

Download Files:

  • Download Flash tool: QPST or QFIL Tool
  • Meizu 16Xs QCN File (zip) – Link
  • Download QCN Rebuilder Tool
  • Download Meizu USB Drivers

Disclaimer:

  • Download and Install AOSP Android 10 for Meizu 16Xs [GSI Treble]
  • Download and Install Mokee OS on Meizu 16Xs based on Android 10 Q
  • How To Install Flyme OS 7 On Meizu 16Xs [Beta and Stable Stock ROM]